Fully automatic gas block equipment requires the requirements of product specifications, quality, and body strength during the production process. The following is a general summary of the quality requirements of the body in the production of fully automatic gas block equipment:
1. Product specifications of fully automatic gas -added equipment: The products produced by the gas block equipment should have a complete shape specification, and the surface should be smooth to avoid defects such as rigidity, layered cracks, fractures, bending, and flying edges. These requirements help ensure the quality and stability of the product.
2. The density and weight of the brick blade production of fully automatic gas block equipment: During the production process, the volume density of the brick blade composed of the gas -added equipment should be controlled within the range of 1800 ～ 2100kg/m3, and the quality of a single brick should be controlled at 2700 2700 ~ 3100g. These parameters help ensure the strength and stability of the brick, as well as the use of expected use requirements.
3. Gulf strength detection: The strength of the body production of fully automatic gas block equipment can be detected by empirical method and instrument method. Experience method mainly depends on the experience of the operator. Pressing or patting the surface of the blank body by fingers or palms, or opening the side plate of the mold to understand the degree of hardening of the body. The instrumental rule measures the strength of the body quantitatively with the help of a special instrument. These two methods can effectively detect the hardness of the body to ensure that they meet the expected quality standards.
By following these key points, the production process of fully automatic gas block equipment will be more efficient, and products that meet the requirements and quality standards can be produced. These requirements are very important for the production of high -quality and stable cheap block products
