The steam pressure and gas -reinforced concrete block equipment is fully automatic equipment. The boarding machine is used to separate the qi of the vertical kettle from the mechanical completion layer and the layer. The finished product conveyor can be fully automatically completed, and it is not easy to damage the high productivity of concrete blocks.
1. After steaming pressure, the blank body is easy to re -adhere together. The trigger separates it one by one before it is automatically packaged;
2. The trigger can eliminate waste and sub -products caused by adhesion, while ensuring the normal operation of the packing line;
3. The trigger trigger in the steaming pressure and the aerated concrete block equipment can be reliably and uniformly clamped the block, with a small an average error, which guarantees the quality of the pupa;
4. Each pair of fixtures in the design of the trigger trigger hydraulic system is set up separately, and you can choose to implement the position of the clamping tie;
5. The clamping force of the trigger fixture can be freely adjusted. When the setting of the setting force, it will automatically stop the pressure, keep clamping, and adapt to the block of different intensity levels;
6. The speed, the itinerary, and the stroke can be adjusted according to the usage;
7. The lifts of the block are driven by hydraulic pressure and completed through the transmission device and the beam. The transmission device has an imported encoder to accurately control the position of the block lift;
8. There are two operations: automatic and manual operation methods. There are coarse and refined filters on the hydraulic transmission in the oil circuit. When the filter is locally blocked, it will automatically alarm and automatically make emergency treatment.
The board of the steaming pressure and the concrete block equipment consists of the beams, vertical beams, board components, and enhanced components.
1. The beams, vertical beams, pyramid components and the car are stitched from steel and steel plates.
2. The power is provided by the hydraulic station.
