In the process of producing environmentally friendly gas filling plates, there are many equipment involved in the operation, and the production process is not the same. As a whole production line of aerated sheet equipment, there will inevitably be some problems in operation and some pollution. Let's talk about the pollution and how to deal with it.
1. Noise pollution in the production process of aerated sheet equipment. This pollution is a problem that will be encountered in all industrial production, and in the aerated plate equipment, the main equipment that produces noise is the ball mill, agitator and other machines. In order to reduce noise and their impact on the surrounding environment during the production process, WEida uses noise reduction and shock absorption equipment, and uses a glottis to play its isolation role.
Second, the dust pollution generated in the production of aerated plate equipment. This pollution mainly comes from the crushing of raw materials and the transportation of dust materials. Weida's solution to this is:
1, for a large area of dust belt, consider isolation measures, or often sprinkling water to reduce ground dust;
2, the use of closed equipment, the use of pipes to eliminate dust bubbling phenomenon.
3, the selection of cloth bag dust collector, reduce the dust concentration of the entire production workshop, so that it is less than 6 mg/cubic meter.
Third, the pollution in the production process of aerated plate equipment mainly comes from the autoclave condensate and the sewage discharged from the boiler room. We know that autoclave will form condensate in the maintenance process, especially in the initial heating stage will produce a large amount of condensate, it should be emptied in time. In the case of water storage, the bottom temperature is lower than the temperature of other parts, and the resulting temperature difference makes the bottom stress too large, which will cause great damage to the autoclave itself.
Treatment method: Build a sewage pond. Since the sewage does not contain intrinsic matter, it can be pumped to the slurry tank to configure the slurry for recycling.
Since our purpose is to produce environmentally friendly gas plate, then in the production process of gas plate equipment should try to avoid and reduce pollution and waste generation, do a good job of recycling, make full use of raw materials while saving energy and reducing consumption, produce good quality gas plate and brick products.
