1. The mesh cage is processed, followed by anti-corrosion treatment.
2. Raw material selection, crush the materials separately and measure, stir and mix, pour the prepared raw materials into the mold box through the pouring building, and then stir the materials for foaming to make the bubbles in the materials uniform. The mesh cage is then inserted into the material through the brazing equipment.
3. The mold is transported by the steam curing car to the resting room for high temperature resting until the material is foamed and the box is full, and the blank is formed.
4. After the autoclaved aerated plate blank is formed, turn over the spreader to turn the mold 90 degrees and leave the blank on the side plate of the mold to enter the next stage.
5. Then the autoclaved aerated plate blank is sent to the automatic cutting unit, and the horizontal cutting is carried out according to the expected set plate specifications, and then the scrap on the upper and lower layers of the cut blank is removed by the peeling and turning platform. The cycle enters the next round of production, and the plate is basically formed.
6. Finally, the number of autoclaved aerated panels is transported into the autoclave for high-pressure curing to increase the strength of the aerated concrete panels.
7. After the autoclaved aerated sheet comes out of the kettle, it will be split by the splitting machine, and then automatically packed by the automatic packing machine.
