The rotary fixture for packing aerated bricks is a kind of palletizing equipment installed on the truck, simple and practical, low cost, even some small scale brick factories, using non-intelligent production mode can also be used separately for product packaging. The gas-filled brick baling machine can realize the functions of walking, lifting, clamping and rotating. The rotary fixture is needed to replace manual operation in the stage of exiting the autoclave after the curing of the brick. The efficiency of exiting the autoclave is high, and the performance of the gas-filled brick can be avoided during the process of exiting the autoclave. Pneumatic brick rotating fixture adopts hydraulic rotation control, can rotate positive and negative 90° for single-layer cross stacking, to ensure that the gas block does not fall during the conveying process, the application of high efficiency and intelligence in the equipment can be replaced when the product is damaged, so that the packaged gas brick product quality appearance of the pass rate is high.
In the production of aerated brick, the previous handling method of the product after the reactor is manual, but the temperature of the newly generated product is high, the damage to the staff is great in the handling process, and the efficiency of handling and palletizing is low, and the damage rate is high. The existence of the system's air brick packing equipment avoids such a situation, in which the rotating fixture only needs one person to operate, but the workload can reach the past five tasks, the equipment in the brick clamping, lifting, transferring at the same time can also be mismatched on the product, to ensure packaging or bundling.
If you want the working efficiency of the gas brick packaging equipment to be stable, you want to pay attention to maintenance, and the key to ensuring lubrication is the rotating fixture. The main function of lubrication is to reduce friction and wear, cooling and heat dissipation and sealing protection, the working characteristics of the rotating fixture show that the equipment should move frequently in the work, and the parts should be lubricated. There are many lubrication measures for various mechanical equipment, different types of lubricating oil can not be mixed, and there are many types of lubricating oil, which should be selected according to the lubrication requirements of the equipment.
