Due to the harsh working environment of aerated brick equipment, high-temperature weather operations and high-load operations are often encountered, so equipment damage is also relatively common. The on-site maintenance conditions are not perfect, so it is necessary to keep lubricating oil to protect the equipment foundation. The selection of lubricating oil should be based on the production situation of the equipment, so that not only the lubrication of the aerated brick equipment is guaranteed, but the life cycle of the mechanical equipment will also be prolonged. Lubricating oil is mainly used to protect the equipment. The selection method of lubricating oil for the production of aerated brick equipment is introduced below.
The choice of lubricating oil should be considered from the three major factors of the working condition, state and working environment of the aerated brick equipment.
1. When the aerated brick equipment is running at high speed, it is necessary to choose a lubricant with low viscosity and base oil modulation; if it is running at low speed, the opposite is true.
2. When the aerated brick equipment is working under high load, it is necessary to choose a lubricating oil with high viscosity and high thickening agent composition; if it is overloaded, choose a lubricating oil containing extreme pressure additives; for medium and low loads, generally choose the consistency of No. 2. Medium viscosity oil.
3. If the working environment of aerated brick equipment is relatively humid, you need to use lubricating oil with better water resistance; if it is dusty, the dust will also cause certain damage to the equipment, then you need to choose lubrication with good sealing performance Oil forms a layer of film on the surface of the equipment, which protects the equipment well.
