In the development of new wall materials policy, fly ash aerated block equipment, aerated brick equipment and aerated board equipment, low power consumption in the process of producing building materials, non-burning coal, non-discharge, low production cost, and energy saving, The advantages of environmental protection, waste recycling and efficiency improvement. It has been approved by the architectural design and construction departments and can be widely used in high-rise frame structure construction projects.
The production process and equipment functions of aerated block equipment products mainly have the following points:
1. Raw material pretreatment equipment
⑴ Crusher: The massive materials of aerated bricks, such as quicklime, gypsum, etc., must be crushed before they can enter the next process.
⑵Pulverizer: The materials of aerated bricks must be ground before they can react better. Ball mills are mainly used for grinding. There are two types of ball mills: dry grinding and wet grinding, which can be selected as required.
2. Raw material measuring equipment
The measurement of raw materials generally adopts a microcomputer-controlled automatic measurement system
3. Material mixing and pouring equipment
The material mixing and pouring equipment is mainly a mixer, which is both a mixing equipment and a slurry pouring equipment.
4. Cutting machine
After the material is poured and gassed, a green body is formed. Due to the large volume of the blank, cutting must be performed to achieve the required product size.
5. Autoclave
Autoclave is a device for silicate products to undergo hydration reaction and obtain physical and mechanical properties. Its operation and use in the production of aerated concrete is an important content related to safe production and energy utilization.
6. Boiler
The boiler mainly provides heat energy for heating facilities such as autoclave and pre-heating kiln.
7. Auxiliary equipment
⑴Mould frame, bottom plate, mould car
These equipments cooperate to form a pouring mold and are the main forming equipment for aerated bricks.
⑵ Steamed car, shuttle car, spreader
These auxiliary equipment are necessary for the autoclave curing system.
The emergence of aerated brick equipment products is to meet the needs of construction applications, combining the development of new wall materials with the improvement of building performance and improvement of building functions. It has stronger vitality in the field of construction, and can develop various wall materials according to local conditions, so as to achieve the comprehensive goals of energy saving, protection of arable land, utilization of industrial waste, and the development of circular economy.
