Aerated Concrete Block Machine produced the aerated block which has the advantages of light weight, high strength, easy processing, etc., and it is widely favored in the market.At the same time, because it uses fly ash as construction materials, it is environmentally friendly and enjoys preferential policies in all aspects. . Various advantages also attract many investors. As a production machine, during long-term use, it is necessary to pay attention to the maintenance of the machine to extend the service life of the machine. How to do it?
How do you maintain the Aerated Concrete Block Machine?
Here are six top tips for the Aerated Concrete Block Machine maintenance:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing, it directly affects the life and operation rate of the machine, and the seal must be good
2. Pay attention to whether the working of each part of the machine is normal
3. Pay attention to check the degree of wear of easily worn parts, and pay attention to replace worn parts at any time
4. On the plane of the bottom frame of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.
5. Use aerated concrete blocks to set the bearing oil temperature to rise, stop immediately and check the cause to eliminate
6. If the rotating gear is running, if there is an impact sound, stop and check immediately, and eliminate the summary. The autoclaved aerated block is made of cement, lime, slag, sand, fly ash, gas generating agent, bubble stabilizer and regulator, etc. Substances are the main raw materials, which are manufactured through processes such as grinding, metering, mixing, pouring, gas expansion, static stopping, cutting, autoclave curing, and finished product processing.
